Technicolor - Thomson SpeedTouchTM620 manual 126

Chapter 9

The Integrated SpeedTouch™ ISDN Modem

Step Action

8Click Other.

Result: the Other page appears:

9Select the Mode (On-Demandor Always On)

10Fill in the idle time limit. If the connection is On-Demand, and the connection is idle for this amount of time (i.e. no traffic), the connection shuts down.

The other values are automatically retrieved when the PPP connection is established.

You cannot enable Callback via the Web interface. For this, you must use CLI. If you do not enable it, the SpeedTouch™ will establish the ISDN connection over which the PPP connection is made.

Via CLI Use the following command sequence to configure the ISDN dial-in connection via

CLI:

[isdn]=>ifconfig	number	mlppp
intf
BODstart	BODend	mode
callback	group
[isdn]=>ifconfig
intf = buisdn
[number] = 025292222
[mlppp] =	enabled
disabled
[mlppp] = disabled
[BODstart] = 40
[BODend] = 38
[mode] = dialout
[callback] =	enabled
disabled
[callback] = disabled

[group] = empty

:isdn ifconfig intf=buisdn mlppp=disabled callback=disabled [isdn]=>:isdn ifconfig intf=buisdn mlppp=disabled callback=enabled [isdn]=>saveall

[isdn]=>:ppp

[ppp]=>ifattach intf bu_isdn

126 E-DOC-CTC-20051017-0155 v1.0