Hypertec ISDN 10T Router Local IP Mask, Dial Isdn number, Encapsulation Protocol, Compression

Configura

Local IP Address

The local IP address is the IP address assigned to this router. The IP address is entered in the standard IP address format of a.b.c.d. The local IP address is required during the PPP negotiation. Please ask your ISP if you don’t possess one, unless you have a connection with dynamic IP address allocation. You would need to reset the router if this field gets changed.

Local IP Mask

The local IP mask is used to describe the local IP sub-netting. The IP mask is entered by clicking the IP address bit map. The number of bits assigned for the IP subnet is shown next to the IP address bit map as a decimal number for your reference. You would need to reset the router if this field get changed.

Dial (ISDN) number

The remote ISDN number is the ISP’s ISDN number you want to dial to gain access to the Internet. Your ISP will provide you a list of ISDN numbers for you to choose from. In North America, the dialing of a ‘1’ followed by 10 digits is required in order to access the clean 64K BPS ISDN B channel(s). There should be only digits in this field, no space or other terminators are acceptable.

Encapsulation Protocol

The encapsulation protocol specifies the protocol you want to run over the data channel. Select PPP, if you want to run single channel PPP. Select MLPPP, if you want two channel PPP.

Compression

The compression field specifies if the Stac compression protocol will be turned on for the Internet connection.

Network Address Translation Enable

This field enables or disables the NAT function. This configuration becomes effective immediately after setting.

Dial-out Authentication

The dial-out authentication field specifies which protocol you want to run as the PPP/MLPPP authentication protocol when you initiate an ISDN call to your ISP. Most ISPs support PAP and CHAP protocols.

Dial-out Password

The dial-out password specifies the password to use during the dial-out authentication process. This field is case sensitive, and is given to you by your ISP.

31