Configura

Internet IP Sub-menu

The Internet IP sub-menu (see figure 0-11) is used to configure the IP related parameters of the Internet connection. For most Internet application, the un-numbered interface based configuration is appropriate. You need only to specify a remote IP address, instead of a pair of IP addresses for local end and remote end of the IP connection.

Remote SNMP Enable

This check box is to enable or disable SNMP management from remote. If disabled, the ISDN router will only respond to the SNMP requests from the local Ethernet.

IP Enable

This parameter is to enable or disable the IP routing function. If IP routing is disabled, bridging must be enabled for IP packet to be forwarded through the router. Bridging is rarely used as the protocol for Internet access.

IP Address of Remote Ethernet

The remote IP address is the IP address of the remote router located at your ISP site. The IP address is entered in the standard IP address format of a.b.c.d. The remote IP address is required during PPP negotiation. Please ask from your ISP if you don’t possess one.

Figure 0-9, Internet IP Window

42

Page 49
Image 49
Hypertec ISDN 10T Router manual Internet IP Sub-menu, Remote Snmp Enable, IP Enable, IP Address of Remote Ethernet