Introduction

A schematic of how the Hypertec ISDN Router is used is shown in Figure 0-2 A Hypertec ISDN Router Application.

Figure 0-2 A Hypertec ISDN Router Application

The Hypertec ISDN Routersupports the following features:

ISDN

•U or ST interfaces

•Switched ISDN service for various switches worldwide : National ISDN, ATT 5ESS, DMS switches in North America

EuroISDN(ETSI) switches in Europe NTT switches in Japan

EuroISDN switches in Taiwan, Singapore ATT 5ESS switches in Korea

•Detailed accounting including dialed numbers, disconnect causes, frame statistics

•Auto Dial-out triggered by outgoing LAN traffic, auto disconnect due to inactive connection

•Bandwidth-On-Demand, 0<->1<->2 bandwidth management,1B to 2B if traffic increases beyond threshold,. 2B to 1B if traffic falls below threshold, 1B to 0B if traffic is idle for more than an pre-defined period

Ethernet

•4 port Ethernet Repeater with unlimited LAN users

Internet/Intranet

•PPP, MultiLink PPP (MLPPP), LCP, IPCP, IPXCP, and BCP

•Internet and Intranet connection profiles. Allows one B channel for Internet connection and the other B channel for intranet connection

•STAC LZS data compression with 128 KPBS -> 512 KBPS, 4:1 compression ratio on normal text file

•Static or dynamic IP address assignment

•Static or dynamic IP Route

5