Features and Functions Guide
SAMSUNG
Bluetooth
Mono Headset
WEP500
Important:
Be sure to first follow the Quick Start Guide on
the reverse side of this guide to complete initial setup
of your headset.
Turn headset on or off
To turn the headset on,
Press and hold the
4 seconds until you see 4 blue flashes on the indicator light.
You will hear a tone and see the indicator light flashes while the power is on
(see Meaning of the indicator light of this guide).
To turn the headset off,
Press and hold the
4 seconds until you see blue and red flashes on the indicator light.
You will hear series of 2 tones and see the indicator light stops flashing.
Wear the headset
Wear the headset in your ear.
In general, you will get better performance when there are no obstructions (including parts of your body) between the headset and the phone.
You can replace the original earpiece cover with the supplied earpiece cover. Depending on what ear you are going to wear the headset, simply adjust the cover accordingly.
Left | Right | Left | Right |
Adjust the volume
Press [
] on the side of the headset to increase the volume level and [
] to decrease the volume level.
Your headset has the Auto volume control feature which changes the volume level you have selected to the most suitable level automatically according to the noise around you.
At very high volumes, prolonged listening to the headset can damage your hearing.
Troubleshooting
My phone does not find my headset. Make sure the blue indicator light on your headset turns on when your phone is searching for devices.
My headsest worked before but now it is not working.
Make sure your phone is on and the Bluetooth feature is turned on in your phone.
If the Bluetooth feature has been turnned off or was turned on only temporarily, you may need to restart the Bluetooth feature.
If you have confirmed the Bluetooth feature is on in your phone, pair your phone and headset again.
Headquarters:
1301 East Lookout Drive Suite 150 Richardson, TX 75082
Internet Address: http://www.samsungmobileusa.com/ accessories
Customer Care Center:
Make calls
Making a voice activated call
If the phone’s voice recognition feature is on, you can make a voice activated call.
Press and hold the
Say the name of the person you wish to call. Depending on your phone, this feature may not be supported.
Redialing the last number
Press the
Depending on your phone, how to redial the last number may vary.
Ending a call
Press the
Answering a call
When a call comes in, the headset sounds the ring tone and flashes the blue indicator twice. Press the
Switching off or on the microphone (Mute)
Press and hold [
] or [
] to switch off the headset’s microphone. To switch it back on, press and hold either one of the buttons again.
Transferring a call from the phone to the headset
If you answer the call with your phone, you can transfer the call to the headset by pressing the
Turning the indicator light on or off
You can deactivate the use of the indicator light in Standby mode and in Active mode.
Press and hold [
] and [
] at the same time to turn the indicator light on or off.
Use enhanced features
Enhanced features are available for phones that support the
•Rejecting a call
When you receive a call, press and hold the
•Place a call on hold
While you are on a call, press and hold the
•Answering a second call
When your phone notifies you of another incoming call while you are on a call, press and hold the
You can switch between calls by pressing and holding the button.
Pressing the
Meaning of the indicator light
Light | Tone | Status |
|
|
|
Flashes in | Quick series | • The headset is in Active mode. |
blue every | of 2 tones. | • The headset has an active |
8 seconds. | (Active mode | call in progress. |
| starts.) | • You can talk up to 3.5 hours.* |
|
|
|
Flashes in | Quick series | • The headset is in Standby mode. |
blue every | of 2 tones. | • The headset is waiting |
3 seconds. | (Standby | for a call. |
| mode starts.) | • The headset can be in |
|
| Standby mode up to 80 |
|
| hours.* |
|
|
|
Flashes in | 5 tones every | • The battery of the headset |
red. | 20 seconds. | is low. |
|
| • There is less than 10% of |
|
| battery power left. Recharge |
|
| the battery. |
*Depending on the phone type and usage, the actual time may vary.
