5: Configuration Using Web Manager
Server Configuration
The unit’s server values display when you select Server from the main menu. The following sections describe the configurable parameters on the Server Settings page.
Figure 5-4 Server Settings
To configure the xDirect device server settings:
1.On the main menu, click Server.
2.Configure or modify the following fields:
Server Configuration
| Enhanced Password | Select whether to enable advanced password: |
|
| Enable: selecting this option enables advanced password creation, |
|
| allowing you to create passwords up to 16 bytes in length. |
|
| Disable: selecting this option disables advanced password creation, |
|
| allowing you to create basic passwords up to 4 bytes in length. |
| Telnet/Web Manager | Enter the password required for Telnet configuration and Web Manager |
| Password | access. No password or entering a “blank” password entry will disable default |
|
| password protection. |
| Retype Password | |
|
| access. |
|
|
|
Advanced |
| |
ARP Cache Timeout (secs)
When the unit communicates with another device on the network, it adds an entry into its ARP table. ARP Cache timeout defines the number of seconds
xDirect User Guide | 26 |
