8: Setup Mode: Channel Configuration
Use the following table to select flow control options:
Table 8-4 Flow Control Options
Flow Control Option | Hex |
No flow control | 00 |
|
|
XON/XOFF flow control | 01 |
|
|
Hardware handshake with RTS/CTS lines | 02 |
|
|
XON/XOFF pass characters to host | 05 |
|
|
Port Number
The setting represents the source port number in TCP connections. It is the number that identifies the channel for remote initiating connections.
Port No (10001) ? _
The default setting for Port 1 is 10001. The range is
Table 8-5 Reserved Port Numbers
Port Numbers | Reserved for |
1 – 1024 | Reserved (well known ports) |
|
|
9999 | Telnet setup |
|
|
Reserved for Redirector | |
|
|
30704 | Reserved (77F0h) |
|
|
30718 | Reserved (77FEh) |
|
|
Warning: We recommend that you not use the reserved port numbers for this setting as incorrect operation may result.
Use Port 0 for the outgoing local port to change with each connection. The port range is 50,000- 59,999. Each subsequent connection increments the number by 1 (it wraps back around to 50,000).
Only use this automatic port increment feature to initiate a connection using TCP. Set the port to a
Connect Mode
Connect Mode defines how the unit makes a connection, and how it reacts to incoming connections over the network.
ConnectMode (C0) ? _
Enter Connect Mode options in hexadecimal notation. The default setting is C0.
xDirect User Guide | 44 |
