Lantronix 900-653-R TCP Keepalive secs, Monitor Mode @ Bootup, CPU Performance Mode, MTU Size

	5: Configuration Using Web Manager
TCP Keepalive (secs)	TCP Keepalive time defines how many seconds the unit waits during an
	inactive connection before checking its status. If the unit does not receive
	a response, it drops that connection. Enter a value between 0 and 60
	seconds. 0 disables keepalive. The default setting is 45.
Monitor Mode @ Bootup	Select Disable to disable entry into the monitor mode using the yyy or xx1
	key sequence at startup. This field prevents the unit from entering monitor
	mode by interpreting the stream of characters that are received during the
	device server's initialization at startup. The default setting is Enable.
CPU Performance Mode	Select the xDirect's performance mode. Higher performance settings
	require more energy. Low is 26 MHz. Regular is 48 MHz; High is 88 MHz.
	The default is Regular.
HTTP Server Port	This option allows the configuration of the web server port number. The
	valid range is 1-65535. The default setting is 80.
Config Server Port	Not applicable for this product.
MTU Size	The Maximum Transmission Unit (MTU) is the largest physical packet size
	a network can transmit for TCP and UDP. Enter between 512 and 1400
	bytes. The default setting is 1400 bytes.
TCP Re-transmission	The desired TCP re-transmission timeout value. If the ACK is not received
timeout (ms)	for a packet sent from the xDirect device, then the unit will retransmit the
	data. The valid range is 500-4000 msec. The default is 500.

3.When you are finished, click the OK button.

4.On the main menu, click Apply Settings.

xDirect User Guide 27