8:Setup Mode: Channel Configuration

This chapter explains how to configure the serial port.

Notes:

Current values display in parenthesis.

You must enter some values in hexadecimal notation. See Appendix E: Binary to Hexadecimal Conversions.

Channel 1 (Option 1)

Select Channel 1 (Option 1) from the Change Setup menu to define how the serial port responds to network and serial communications. The following sections describe the configurable parameters within the Channel configuration menu.

Figure 8-1 Serial Port Settings

Baudrate (9600) ?

I/F Mode (4C) ?

Flow (00) ?

Port No (10001) ?

ConnectMode (C0) ?

Send '+++' in Modem Mode (Y) ?

Show IP addr after 'RING' (Y) ?

Auto increment source port (N) ?

Remote IP Address : (000) .(000) .(000) .(000)

Remote Port (0) ?

DisConnMode (00) ?

FlushMode (00) ?

DisConnTime (00:00) ?:

SendChar 1 (00) ?

SendChar 2 (00) ?

Baudrate

The unit and attached serial device, such as a modem, must agree on a speed or baud rate to use for the serial connection. Valid baud rates are 300, 600, 1200, 2400, 4800, 9600 (default), 19200, 38400, 57600, 115200, and 230400 baud. xDirect also supports high-performance baud rates of 460800 and 921600 bits per second. See CPU Performance (on page 55).

Baudrate (9600) ? _

xDirect User Guide

42

Page 42
Image 42
Lantronix 900-653-R manual Setup Mode Channel Configuration, Channel 1 Option, Baudrate