5: Configuration Using Web Manager

Network Configuration

The unit’s network values display when you select Network from the main menu. The following sections describe the configurable parameters on the Network Settings page.

Figure 5-3 Network Settings

Network Mode

1.Click Network from the main menu.

2.Note the following:

Network Mode

For the xDirect, Wired Only is the only choice. It enables the Ethernet network connectivity.

Automatic IP Address Configuration

An IP address can be assigned automatically. You then enter related network settings.

To assign an IP address automatically:

1.On the main menu, click Network.

2.Select Obtain IP address automatically.

3.Enter the following (as necessary):

BOOTP

Select Enable to permit the Bootstrap Protocol (BOOTP) server to assign the IP

 

address from a pool of addresses automatically. Enable is the default.

 

 

DHCP

Select Enable to permit the Dynamic Host Configuration Protocol (DHCP) to assign a

 

leased IP address to the xDirect unit automatically. Enable is the default.

 

 

xDirect User Guide

24

Page 24
Image 24
Lantronix 900-653-R manual Network Configuration, Network Mode, Automatic IP Address Configuration