5: Configuration Using Web Manager
Channel 1 Configuration
The Channel 1 configuration defines how the serial ports respond to network and serial communication.
Serial Settings
To configure the channel’s serial settings:
1.On the main menu, click Serial Settings (under Channel 1) to display the Serial Settings window.
Figure 5-6 Channel Serial Settings
2. In the available fields, enter the following information:
Channel 1
Disable Serial Port
When selected, disables communication through the serial port. The serial port is enabled by default.
Note: This feature is not available on single port device servers, since it can only be applied to channel 1.
Port Settings
Protocol | From the |
| channel. The default setting is RS232. |
|
|
Flow Control | Flow control manages data flow between devices in a network to ensure it |
| is processed efficiently. Too much data arriving before a device is prepared |
| to manage it causes lost or retransmitted data. None is the default. |
|
|
xDirect User Guide | 29 |
