5: Configuration Using Web Manager
Host List Configuration
The xDirect scrolls through the host list until it connects to a device listed in the host list table. After a successful connection, the unit stops trying to connect to any others. If this connection fails, the unit continues to scroll through the table until the next successful connection.
The host list supports a minimum of 1 and a maximum of 12 entries. Each entry contains an IP address and a port number.
Note: The host list is disabled for Manual and Modem Mode. The unit does not accept a data connection from a remote device when the hostlist option is enabled.
To configure the host list:
1. On the main menu, click Hostlist.
Figure 5-5 Hostlist Settings
2. Enter or modify the following fields:
Retry Settings
Retry Counter | Enter the value for the number of times the xDirect should attempt to retry |
| connecting to the host list. The default setting is 3. |
Retry Timeout | Enter the duration (in milliseconds) the xDirect should abandon attempting a |
| connection to the host list. The default setting is 250. |
|
|
Host Information
Host Address | Enter or modify the host’s IP address. |
Port | Enter the target port number. |
|
|
3.When you are finished, click the OK button.
4.On the main menu, click Apply Settings.
xDirect User Guide | 28 |
