Chapter 22: WAN Configuration Guide

Router R1 Configuration File

The following configuration file applies to Router R1.

----------------------------------------------------------------------

Configuration for ROUTER R1

----------------------------------------------------------------------

port set hs.7.1 wan-encapsulation frame-relay speed 45000000 port set hs.3.1 wan-encapsulation frame-relay speed 45000000 port set hs.3.2 wan-encapsulation ppp speed 45000000

port set et.1.* duplex full

frame-relay create vc port hs.7.1.106 frame-relay create vc port hs.3.1.103

frame-relay define service CIRforR1toR6 cir 45000000 bc 450000 frame-relay apply service CIRforR1toR6 ports hs.7.1.106

vlan create s1 id 200 vlan create s2 id 300

vlan add ports hs.3.1.103, hs.7.1.106 to s1 vlan add ports hs.3.2 to s2

interface create ip s1 address-netmask 100.100.100.1/16 vlan s1 interface create ip s2 address-netmask 120.120.120.1/16 vlan s2

rip add interface all

rip set interface all version 2

rip set interface all xmt-actual enable rip set auto-summary enable

rip start

system set name R1

Router R2 Configuration File

The following configuration file applies to Router R2.

----------------------------------------------------------------------

Configuration for ROUTER R2

----------------------------------------------------------------------

port set hs.7.1 wan-encapsulation ppp speed 45000000 port set hs.7.2 wan-encapsulation ppp speed 45000000 port set et.1.* duplex full

vlan create s2 id 300

interface create ip PPPforR2toR3 address-netmask 130.130.130.2/16 peer-address 130.130.130.3 port hs.7.2

interface create ip SBitsLAN address-netmask 20.20.20.2/16 port et.1.1 vlan add ports hs.7.1 to s2

interface create ip s2 address-netmask 120.120.120.2/16 vlan s2

interface create ip VideoClient address-netmask 200.200.200.1/16 port et.1.2

qos set ip VideoFromNT high 100.100.100.100 200.200.200.200 any any qos set ip VideoFrom95 high 200.200.200.200 100.100.100.100 any any

334

SmartSwitch Router User Reference Manual

Page 334
Image 334
Cabletron Systems SmartSwitch manual Router R1 Configuration File, Following configuration file applies to Router R1