Cabletron Systems SmartSwitch manual Managing the SSR, Displaying Configuration Changes

Chapter 1: SSR Product Overview

Displaying Configuration Changes

While in Configure mode, you can display the configuration of the running system as well as non-activated changes that are in the Scratchpad by entering the following command:

Display running system configuration and non-activated changes in scratchpad.

show

While in Enable mode, you can display the active configuration of the system by entering the following command:

Display active configuration of the system.

system show active-config

The show and system show active-configcommands normally display configuration commands in the order that they are executed. To display the configuration commands in a different order, enter the following command in Configure mode:

Display configuration commands in alphabetical order.

system set show-config alphabetical

Whenever you have activated commands in the scratchpad, you can compare the activated changes with a previously-saved configuration file. To compare the activated commands with the Startup (or another) configuration file, enter the following command in Configure mode:

Compare activated commands with Startup configuration file.

diff <filename>startup

Managing the SSR

The SSR contains numerous system facilities for system management. You can perform configuration management tasks on the SSR including:

•Setting the SSR name

•Setting the SSR date and time

•Configuring NTP

•Configuring the CLI

•Configuring SNMP services

SmartSwitch Router User Reference Manual 43