Cabletron Systems SmartSwitch manual Ip-policy show interface interface

Chapter 13: IP Policy-Based Forwarding Configuration Guide

Display information about all	ip-policy show interface <interface>
IP policies on a specified
interface.
Display information about IP	ip-policy show interface all
policies that have been applied
to all interfaces
Clear statistics gathered for IP	ip-policy clear allpolicy-name <name>all
policies.

For example, to display information about an active IP policy called “p1”, enter the following command in Enable mode:

ssr# ip-policy show policy-name p1

--------------------------------------------------------------------------------

IP Policy name			: p1	1
Applied Interfaces : int1					2
Load Policy			: first available 3
4			5		6	7	8	9		10
ACL		Source IP/Mask			Dest. IP/Mask	SrcPort	DstPort	TOS Prot
---		--------------			-------------	---------	--------- --- ----
prof1		9.1.1.5/32			15.1.1.2	any	any		0	IP
prof2		2.2.2.2/32			anywhere	any	any		0	IP
everything		anywhere			anywhere	any	any		0	IP
						Next Hop Information
						--------------------
11	12	13		14	15	16		17	18
Seq	Rule	ACL		Cnt Action		Next Hop		Cnt	Last
---	----	--------		---	-----------	--------		---	----
10	permit	prof1		0	Policy Only	11.1.1.2		0	Dwn
20	permit	prof2		0	Policy Last	1.1.1.1		0	Dwn
						2.2.2.2		0	Dwn
						3.3.3.3		0	Dwn
999	permit	everything		0	Policy Only	drop		N/A	N/A
65536 deny		deny		0	N/A	normal fwd		N/A	N/A
21

Legend:

1.The name of the IP policy.

2.The interface where the IP policy was applied.

3.The load distribution setting for IP-policy statements that have more than one next- hop gateway; either first available (the default) or round-robin.

4.The names of the profiles (created with an acl statement) associated with this IP policy.

220 SmartSwitch Router User Reference Manual