Cabletron Systems SmartSwitch manual Ospf Configuration Examples

Models: SmartSwitch

1 338
Download 338 pages 45.77 Kb
Page 122
Image 122

Chapter 9: OSPF Configuration Guide

Show OSPF interfaces.

ospf show interfaces

 

 

Shows information about all valid next

ospf show next-hop-list

hops mostly derived from the SPF

 

calculation.

 

 

 

Show OSPF statistics.

ospf show statistics

 

 

Shows information about OSPF Border

ospf show summary-asb

Routes.

 

 

 

Show OSPF timers.

ospf show timers

 

 

Show OSPF virtual-links.

ospf show virtual-links

 

 

OSPF Configuration Examples

For all examples in this section, refer to the configuration shown in Figure 7 on page 126.

The following configuration commands for router R1:

Determine the IP address for each interface

Specify the static routes configured on the router

Determine its OSPF configuration

!++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

!Create the various IP interfaces. !++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ interface create ip to-r2 address-netmask 120.190.1.1/16 port et.1.2 interface create ip to-r3 address-netmask 130.1.1.1/16 port et.1.3 interface create ip to-r41 address-netmask 140.1.1.1/24 port et.1.4 interface create ip to-r42 address-netmask 140.1.2.1/24 port et.1.5 interface create ip to-r6 address-netmask 140.1.3.1/24 port et.1.6 !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

!Configure default routes to the other subnets reachable through R2. !+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ip add route 202.1.0.0/16 gateway 120.1.1.2

ip add route 160.1.5.0/24 gateway 120.1.1.2 !++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

!OSPF Box Level Configuration !++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ospf start

ospf create area 140.1.0.0 ospf create area backbone ospf set ase-defaults cost 4 !++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

!OSPF Interface Configuration !++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ospf add interface 140.1.1.1 to-area 140.1.0.0

122

SmartSwitch Router User Reference Manual

Page 122
Image 122
Cabletron Systems SmartSwitch manual Ospf Configuration Examples