Cabletron Systems SmartSwitch manual Exporting a Given Static Route to a Specific RIP Interface

Chapter 11: Routing Policy Configuration Guide

4.Create a Direct export source since we would like to export direct/interface routes.

ip-router policy create direct-export-source directExpSrc

5.Create the export-policy redistributing the statically created default route, and all (RIP, Direct) routes into RIP.

ip-router policy export destination ripExpDst source statExpSrc network default

ip-router policy export destination ripExpDst source ripExpSrc network all

ip-router policy export destination ripExpDst source directExpSrc network all

Exporting a Given Static Route to a Specific RIP Interface

In this case, router R1 would export/redistribute the default route over its interface 140.1.1.1 only.

1.Create a RIP export destination for interface with address 140.1.1.1, since we intend to change the rip export policy only for interface 140.1.1.1.

ip-router policy create rip-export-destination ripExpDst141 interface 140.1.1.1

2.Create a static export source since we would like to export static routes.

ip-router policy create static-export-source statExpSrc

3.Create a RIP export source since we would like to export RIP routes.

ip-router policy create rip-export-source ripExpSrc

4.Create a Direct export source since we would like to export direct/interface routes.

ip-router policy create direct-export-source directExpSrc

5.Create the Export-Policy redistributing the statically created default route, and all (RIP, Direct) routes into RIP.

ip-router policy export destination ripExpDst141 source statExpSrc network default

ip-router policy export destination ripExpDst141 source ripExpSrc network all

ip-router policy export destination ripExpDst141 source directExpSrc network all

SmartSwitch Router User Reference Manual 191