Cabletron Systems SmartSwitch manual Example Configurations, St.2 St.4 Router Switch Server

Chapter 4: SmartTRUNK Configuration Guide

Example Configurations

The following shows a network design based on SmartTRUNKs. R1 is an SSR operating as a router, while S1 and S2 are SSRs operating as switches.

Cisco 7500 Router

st.1

10.1.1.1/24 10.1.1.2/24 to-cisco

			st.2		st.4
Router				Switch		Server
	R1	11.1.1.2/24		S1
		to-s1
	12.1.1.2/24
to-	s2

st.3

Switch

S2

st.5

Cisco

Catalyst

5K Switch

The following is the configuration for the Cisco 7500 router:

interface port-channel 1

ip address 10.1.1.1 255.255.255.0 ip route-cache distributed interface fasteth 0/0

no ip address channel-group 1

The following is the configuration for the Cisco Catalyst 5K switch:

set port channel 3/1-2 on

72 SmartSwitch Router User Reference Manual