Cabletron Systems SmartSwitch manual Ip-router policy create aggr-export-source aggrExpSrc

Chapter 11: Routing Policy Configuration Guide

1.Create an Aggregate-Destination which represents the aggregate/summarized route.

ip-router policy create aggr-gen-dest aggrDst140 network 140.1.0.0/16

2.Create an Aggregate-Source which qualifies the source of the routes contributing to the aggregate. Since in this case, we do not care about the source of the contributing routes, we would specify the protocol as all.

ip-router policy create aggr-gen-source allAggrSrc protocol all

3.Create the aggregate/summarized route. This command binds the aggregated route with the contributing routes.

ip-router aggr-gen destination aggrDst140 source allAggrSrc network 140.1.1.0/24

ip-router aggr-gen destination aggrDst140 source allAggrSrc network 140.1.2.0/24

4.Create a RIP export destination for interface with address 130.1.1.1, since we intend to change the rip export policy only for interface 130.1.1.1.

ip-router policy create rip-export-destination ripExpDst130 interface 130.1.1.1

5.Create a Aggregate export source since we would to export/redistribute an aggregate/summarized route.

ip-router policy create aggr-export-source aggrExpSrc

6.Create a RIP export source since we would like to export RIP routes.

ip-router policy create rip-export-source ripExpSrc

7.Create a Direct export source since we would like to export Direct routes.

ip-router policy create direct-export-source directExpSrc

SmartSwitch Router User Reference Manual 193