Cabletron Systems SmartSwitch manual Router R3 Configuration File, Router R4 Configuration File

Chapter 22: WAN Configuration Guide

rip add interface all

rip set interface all version 2 rip set auto-summary enable rip start

system set name R2

arp add 20.20.20.12 exit-port et.1.1 mac-addr 000202:020200

Router R3 Configuration File

The following configuration file applies to Router R3.

----------------------------------------------------------------------

Configuration for ROUTER R3

----------------------------------------------------------------------

port set se.2.1 wan-encapsulation frame-relay speed 1500000 port set et.1.* duplex full

port set hs.4.1 wan-encapsulation frame-relay speed 45000000 port set hs.4.2 wan-encapsulation ppp speed 45000000

frame-relay create vc port se.2.1.304 frame-relay create vc port hs.4.1.103

vlan create s1 id 200

interface create ip SBitsLAN address-netmask 30.30.30.3/16 port et.1.1 vlan add ports hs.4.1.103, se.2.1.304 to s1

interface create ip PPPforR2toR3 address-netmask 130.130.130.3/16 peer-address 130.130.130.2 port hs.4.2

interface create ip s1 address-netmask 100.100.100.3/16 vlan s1

rip add interface all

rip set interface all version 2

rip set interface all xmt-actual enable rip set broadcast-state always

rip set auto-summary enable rip start

system set name R3

arp add 30.30.30.13 exit-port et.1.1 mac-addr 000303:030300

Router R4 Configuration File

The following configuration file applies to Router R4.

----------------------------------------------------------------------

Configuration for ROUTER R4

----------------------------------------------------------------------

port set se.6.1 wan-encapsulation frame-relay speed 1500000 port set se.6.3 wan-encapsulation ppp speed 1500000

SmartSwitch Router User Reference Manual 335