Cabletron Systems SmartSwitch manual Configuration Example

Chapter 8: RIP Configuration Guide

Show RIP information on the specified	rip show interface <Name or IP-addr>
interface.
Show RIP interface policy information.	rip show interface-policy
Show detailed information of all RIP	rip trace packets detail
packets.
Show detailed information of all packets	rip trace packets receive
received by the router.
Show detailed information of all packets	rip trace packets send
sent by the router.
Show detailed information of all request	rip trace request receive
received by the router.
Show detailed information of all response	rip trace response receive
received by the router.
Show detailed information of response	rip trace response send
packets sent by the router.
Show detailed information of request	rip trace send request
packets sent by the router.
Show RIP timer information.	rip show timers

Configuration Example

SSR 1

SSR 2

Interface 1.1.1.1 Interface 3.2.1.1

!Example configuration

!Create interface SSR1-if1 with ip address 1.1.1.1/16 on port et.1.1 on SSR-1 interface create ip SSR1-if1 address-netmask 1.1.1.1/16 port et.1.1

!Configure rip on SSR-1

rip add interface SSR1-if1

rip set interface SSR1-if1 version 2 rip start

!

!

! Set authentication method to md5

rip set interface SSR1-if1 authentication-method md5

!

!Change default metric-in

rip set interface SSR1-if1 metric-in 2

SmartSwitch Router User Reference Manual 113