Kenwood Comprehensive Manual for Hand Mixers: Safety, Usage and Care

￿

￿

		before using your Kenwood
￿		appliance
		● Read these instructions carefully
		and retain for future reference.
	￿	● Remove all packaging and any
		labels.

safety

	● Never put the handmixer body in
	water or let the cord or plug get
	wet.
	● Keep fingers, hair, clothing and
	utensils away from moving parts.
	● Never let the cord touch hot
	surfaces or hang down where a
	child could grab it.
	● Ensure the cord is fully unwound
	before using the handmixer.
	● Never use a damaged handmixer.
￿	Get it checked or repaired: see
	'service and customer care'.
	● Never use an unauthorised
	attachment.
	● This appliance is not intended for
	use by persons (including children)
	with reduced physical, sensory or
	mental capabilities, or lack of
	experience and knowledge, unless
	they have been given supervision
	or instruction concerning use of
	the appliance by a person
	responsible for their safety.
	● Children should be supervised to
	ensure that they do not play with
	the appliance.
￿	● Only use the appliance for its
	intended domestic use. Kenwood
	will not accept any liability if the
	appliance is subject to improper
	use, or failure to comply with these
	instructions.
	before plugging in
	● Make sure your electricity supply is
	the same as the one shown on the
	underside of your handmixer.

Important – UK only

●The wires in the cord are coloured as follows:

Blue = Neutral, Brown = Live.

●The appliance must be protected by a 3A approved (BS1362) fuse.

Note:

●For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).

●If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a 13A socket outlet.

●This appliance conforms to EC directive 2004/108/EC on Electromagnetic Compatibility and EC regulation no. 1935/2004 of 27/10/2004 on materials intended for contact with food.

before using your handmixer for the first time

1Wash the beaters and kneaders: see 'cleaning'.

know your Kenwood

handmixer see illustrations

￿tool release button

￿speed switch

￿cable tidy (if supplied)

￿kneaders

￿beaters

￿grip clip (if supplied)

to use your handmixer

1Insert the beaters or kneaders– turn and push.

important the kneader with the metal collar will only fit into the round socket.

(To remove the tools, press the tool release button.)

2Plug in.

3Push the speed switch forward. ● As the mixture thickens, increase

the speed.

● If the machine labours increase the speed.

● For safety reasons, your handmixer won't work without the beaters or kneaders.

important: When making bread dough we recommend that the dough load does not exceed 450g flour.

cleaning

●Always switch off, unplug and remove the beaters or kneaders before cleaning.

●Never put the handmixer body in water or let the cord or plug get wet.

beaters, kneaders

●Wash by hand or in your dishwasher, then dry. handmixer body

●Wipe with a damp cloth, then dry.

storage see illustration

models HM320/HM326/ HM327 only

1Wrap the cord around the base of the handmixer. Then clip the cord together with the cable tidy.

2Push the grip clip into the sockets. Then clip in the beaters and kneaders.

service and customer care

●If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer.

UK

If you need help with:

●using your handmixer

●servicing or repairs (in or out of guarantee)

￿call Kenwood Customer Care on

023 9239 2333. Have your model number ready - it is located on the underside of your handmixer.

●spares and attachments

￿call 0870 2413653. other countries

●Contact the shop where you bought your handmixer.

●Designed and engineered by Kenwood in the UK.

●Made in China.