46Install Nortel Linux base
Figure 26
NTP clock source configuration window
Press Enter to continue.
17At the prompt, configure the primary DNS server IP address as shown in Figure 27 "DNS server configuration window" (page 46).
Figure 27
DNS server configuration window
Type Y to configure and N if you do not wish to configure and then press Enter. If you selected Y , enter the IP address for the Primary DNS server at the prompt. The default for the Primary DNS server is N.
18In the Configuration Validation 2 screen, type Y if the information is correct and press Enter, as shown in n the Figure 28 "Configuration Validation 2 window" (page 47). If the information is incorrect, type N, make the required changes, and then press Enter.
Note: The CLI command hostconfig can be used to modify the static lookup table for host names. For a list of Nortel Linux base CLI commands see Table 11 "Nortel Linux base CLI commands" (page 141)
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
29 October 2008
