
78Installation and configuration of applications on Linux base
Solid server configuration window by selecting No. Press Enter to continue.
9The Primary Security Service server TLAN IP address screen appears as shown in Figure 66 "Primary Security Service server TLAN IP address window" (page 78). Enter the IP address of the TLAN network interface Primary Security Service server. Type yes to confirm the TLAN IP address is correct.
Figure 66
Primary Security Service server TLAN IP address window
10The Primary Security Service server Fully Qualified Domain Name (FQDN) appears as shown in Figure 67 "Primary Security Service server Fully Qualified Domain name window" (page 78). Enter the Fully Qualified Domain name of the Primary Security Service server. Type Yes to confirm the FQDN is correct. For a definition of FQDN see "FQDN requirements, page 30" (page
36).
Figure 67
Primary Security Service server Fully Qualified Domain name window
Note:
•The Primary Security Service must be up and running at this point.
•You need to know the password for the nortel account on the Primary Security Service server. Installation fails if you do not know this password.
11The Primary Security Service fingerprint screen appears as shown in Figure 68 "Primary Security Service fingerprint window" (page 79). Type Yes to verify the Primary Security Service fingerprint.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
29 October 2008