118CS 1000 on Linux base
Figure 109
Backup Scheduler 2
Note: The CLI command sysbackup can be used to make a system backup. For a list of Nortel Linux base CLI commands see Table 11 "Nortel Linux base CLI commands" (page 141).
You can use the command sysrestore to perform system recovery, as shown in Figure 110 "sysrestore command" (page 118).
Backup files generated by the sysrestore command are named according to the Linux base backup archive naming convention. Sysrestore provides a list of the archives that are available on the backup media.
Sysrestore restores
ATTENTION
Archives created prior to Release 5.5 do not contain application configured system data. If you use an archive created prior to Release 5.5 you cannot restore application configured system data.
Figure 110 sysrestore command
You can also use the installation media as rescue media (CD/DVD for HP DL320 G4 and IBM x306m servers), which supports the recovery of the base system.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
29 October 2008
