Install the CS 1000 applications 79
Figure 68
Primary Security Service fingerprint window
12The nortel password screen appears. Type the password of the nortel account and press Enter. The connection to the Primary Security Service server is complete.
The installation takes approximately 30 minutes to complete. After the installation is complete the disk automatically ejects from the drive and a summary of the installation is shown on the screen.
For detailed information about NRS, see Network Routing Service Installation and Commissioning
Installing the Network Routing Service with ECM joining an existing secure network
Step Action
1Log on to the server using the nortel account.
2Insert the NRS
3Enter the appinstall CLI command
4At the prompt, enter the root account password. The system then prompts you to check the media.
5Enter Y to check the media, or N to proceed without checking the media, and press Enter.
6The Application installation screen appears, as shown in Figure 69 "Application Installation window" (page 80). From the Application installation window, select 3 to install the Network Routing Service with ECM joining an existing secure network. The appropriate packages are installed to the hard drive.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
29 October 2008