6New in this Release
CLI commands
Several new CLI commands are added for Release 5.5. The CLI commands and a brief definition are listed in the following table:
•Table 11 "Nortel Linux base CLI commands" (page 141)
Upgrade procedure
A procedure is added to upgrade the Linux base and applications from Release 5.0 to 5.5. The procedure is shown in the following section:
•“Upgrading Nortel Linux base” (page 54)
Alarms
A listing of system alarm thresholds is added for Release 5.5. The thresholds can be viewed in the following table:
•Table 2 "Warning and Critical thresholds" (page 103)
Screen captures
The installation procedure for the Linux base contains a revised set of screen captures for Release 5.5. The procedure is shown in the following section:
•“Installing the Linux base on the IBM x306m server or HP DL320 G4” (page 37)
Firewall ports
A list of open firewall ports is included in Release 5.5. The list can be viewed in the following table:
•Table 1 "Linux base open firewall ports" (page 102)
Task flow diagrams
Task flow diagrams for the installation and upgrade of the Linux base and applications have been added for Release 5.5. The task flow diagrams can be viewed in the chapter “Linux base and applications installation and upgrade task flow” (page 13).
Other changes
See the following sections for information about changes that are not
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
29 October 2008
Copyright ©
