![](/images/new-backgrounds/1149382/14938281x1.webp)
Install the Linux base software on the IBM x306m and HP DL320 G4 servers 41
DL320 G4 server. Figure 123 "IBM x306m rear view" (page
133)shows the ELAN and TLAN network interfaces for the IBM x306m server. For a definition of ELAN and TLAN see “Network configuration” (page 143).
Note 2: You can accept the default gateway values or choose a value that is more appropriate to your needs. The choice of ELAN or TLAN as the default gateway NIC can be influenced by the applications that you are going to deploy on the server and by your network topology. For a definition of ELAN and TLAN see “Network configuration” (page 143).It is not necessary to make changes to the default gateway during the installation. After the installation, the default gateway NIC can be changed by using the CLI commands baseparamsconfig or networkconfig. Routing entries can be added or deleted by using the CLI command routeconfig. For a list of Nortel Linux base CLI commands see Table 11 "Nortel Linux base CLI commands" (page 141).
Press Enter to continue. The Configuration Validation 1 screen appears as shown in Figure 23 "Configuration validation 1 window" (page 44).
10In the System Console Redirection screen appears as shown in Figure 20 "System Console Redirection window" (page 41). Select the redirection option and press Enter to continue.
Note: This screen appears only if you chose to install using an attached keyboard, video monitor, and mouse.
Figure 20
System Console Redirection window
11In the Time zone selection screen type the appropriate region number at the prompt and then press Enter to continue.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
29 October 2008