ECM Upgrade Procedures 33
This procedure describes upgrading an ECM Member server from Rls
5.00to Rls 5.50. Perform this procedure for each ECM Member server in the system.Prior to upgrading the Backup ECM Security server, the Primary ECM Security server must be upgraded using one of the Upgrade a Primary ECM Security server procedures.
Upgrade ECM Member server
Step Action
If there is a Backup ECM Security server, it must be upgrading prior to completing this procedure. Complete the previous procedure.
1Open a command line interface session to the Primary ECM Security Server through the serial port with the nortel account.
2Perform a backup of the ECM Member server data using the command
sysbackup –b
3Perform a fresh install of the Nortel Linux base software using the procedures in “Install Nortel Linux base ” (page 35).
4Install the CS1000 application software using the procedures described in “Install the CS 1000 applications” (page 70).
5Install the following patches onto the Primary ECM Security server using the “Patching Operation” (page 106) procedure:
•MPLR25520
•MPLR25521
6Open a command line interface session to the Primary ECM Security Server through the serial port with the nortel account.
7Perform a restore of the ECM data using the command sysrestore
8Switch user to the root account and execute the script
/opt/nortel/linuxTrustMgmt/setupNonCA.sh
This script prompts for certificate parameters to create a new certificate for the Backup ECM Security server.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
29 October 2008
