32Linux base and applications installation and upgrade task flow
Step Action
Prior to upgrading the Backup ECM Security server, the Primary ECM Security server must be upgraded using one of the previous Upgrade a Primary ECM Security server procedures.
1Open a command line interface session to the Primary ECM Security Server through the serial port with the nortel account.
2Perform a backup of the Backup ECM Security server data using the command
sysbackup –b
3Perform a fresh install of the Nortel Linux base software using the procedures in “Install Nortel Linux base ” (page 35).
4Install the CS1000 application software using the procedures described in “Install the CS 1000 applications” (page 70).
5Install the following patches onto the Primary ECM Security server using the “Patching Operation” (page 106) procedure:
•MPLR25520
•MPLR25521
6Open a command line interface session to the Primary ECM Security Server through the serial port with the nortel account.
7Switch user to the root account by typing SU and press <enter>.
8Enter the root user password when prompted.
9Execute the following script:
/opt/nortel/isclient/setup_ssha.sh deconfig
10Open a command line interface session to the Primary ECM Security Server through the serial port with the nortel account.
11In the command line interface, perform a restore of the ECM data that was backed up in Step 2, using the command sysrestore.
12Switch user to the root account by typing SU and press <enter>.
13Enter the root user password when prompted.
14Execute the following script:
/opt/nortel/linuxTrustMgmt/setupNonCA.sh
This script prompts for certificate parameters to create a new certificate for the Backup ECM Security server.
This script includes
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
29 October 2008
