82Installation and configuration of applications on Linux base
Figure 73
Primary Security Service fingerprint window
12The nortel password screen appears. Type the password of the nortel account and press Enter. The connection to the Primary Security Service server is complete.
The installation takes approximately 30 minutes to complete. After the installation is complete the disk automatically ejects from the drive and a summary of the installation is shown on the screen.
For detailed information about NRS, see Network Routing Service Installation and Commissioning
Install the Element Manager applications
Use this procedure to run the application DVD after the reboot is complete for the Linux base install.
Installing the Primary Security Service and Element Manager
Step Action
1Log on to the server using the nortel account.
2Insert the MGMT DVD in the DVD tray.
3Enter the appinstall CLI command.
4At the prompt, enter the root account password. The system then prompts you to check the media.
5Enter Y to check the media, or N to proceed without checking the media, and press Enter.
6The Application Installation screen appears, as shown in Figure 74 "Application Installation window" (page 83). From the Application installation window select 1 to install the Primary Security Service with Element Manager. The appropriate packages are installed to the hard drive.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
29 October 2008
