Upgrading Nortel Linux base 63
Figure 47
Configuration validation 1 window
13In the Configuration Validation 2 screen, type Y if the information is correct and press Enter, as shown in n the Figure 48 "Configuration Validation 2 window" (page 64). If the information is incorrect, type N, make the required changes, and then press Enter.
Note: The CLI command hostconfig is used to modify the static lookup table for host names. For a list of Nortel Linux base CLI commands see Table 11 "Nortel Linux base CLI commands" (page 141)
The Configuration Validation 2 screen appears with the correct information. Press Enter to continue.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
29 October 2008
