IBM x306m server 137
The server boots and the Press F1 for Configuration/Setup message appears on the maintenance terminal.
Note: If the server is already up and running, power the server off and on or press the reset button to reboot and receive the Press F1 for Configuration/Setup message.
2Press F1 to invoke the IBM x306m server Configuration/Setup Utility.
The Configuration/Setup Utility menu screen appears.
Figure 127
IBM x306m server Configuration/Setup Utility menu
3Select the System Security option and press Enter.
4Select the Administrator Password option and press Enter.
5At this point refer to the manufacturer’s manual for specific instructions on how to enable or disable the BIOS password.
For additional operating information see the Server Product Guide on the resource
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
29 October 2008
