92Installation and configuration of applications on Linux base

Figure 89

Primary Security Service fingerprint window

12The nortel password screen appears. Type the password of the nortel account and press Enter. The connection to the Primary Security Service server is complete and the installation finishes.

The installation takes approximately 30 minutes to complete. After the installation is complete the disk automatically ejects from the drive and a summary of the installation is shown on the screen.

For detailed information about Element Manager see Element Manager System Reference—Administration(NN43001-632)() .

--End--

Installing the Primary Security Service, Subscriber Manager, and Element Manager

Step Action

1Log on to the server using the nortel account.

2Insert the MGMT DVD in the DVD tray.

3Enter the appinstall CLI command.

4At the prompt, enter the root account password. The system then prompts you to check the media.

5Enter Y to check the media, or N to proceed without checking the media, and press Enter.

6The Application Installation screen appears, as shown in Figure 90 "Application Installation window" (page 93). From the Application installation window select 4 to install the Primary Security Service with Subscriber Manager and Element Manager. The appropriate packages are installed to the hard drive.

Nortel Communication Server 1000

Linux Platform Base and Applications Installation and Commissioning

NN43001-315 02.09

29 October 2008

Copyright © 2007–2008 Nortel Networks

Page 92
Image 92
Nortel Networks NN43001-315 manual Step Action