98Installation and configuration of applications on Linux base
9The Primary Security Service server TLAN IP address screen appears as shown in Figure 98 "Primary Security Service server TLAN IP address window" (page 98). Enter the IP address of the TLAN network interface Primary Security Service server. Type Yes to confirm the TLAN IP address is correct or type No to return to the Primary Security Service server TLAN IP address screen. Press Enter to continue.
Figure 98
Primary Security Service server TLAN IP address window
10The Primary Security Service server Fully Qualified Domain Name (FQDN) screen appears as shown in Figure 99 "Primary Security Service server Fully Qualified Domain name window" (page 98). Enter the Fully Qualified Domain name of the Primary Security Service server. Type Yes to confirm the FQDN is correct or type No to return to the Primary Security Service server Fully Qualified Domain Name screen. For a definition of FQDN see "FQDN requirements, page 30" (page 36) . Press Enter to continue.
Figure 99
Primary Security Service server Fully Qualified Domain name window
Note:
•The Primary Security Service must be up and running at this point.
•You need to know the password for the "nortel" account on the Primary Security Service server. Installation will fail if you do not know this password.
11The Primary Security Service fingerprint screen appears as shown in Figure 100 "Primary Security Service fingerprint
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
29 October 2008
