Install the CS 1000 applications 89
Figure 84
Primary Security Service fingerprint window
12The nortel password screen appears. Type the password of the nortel account and press Enter. The connection to the Primary Security Service server is complete and the installation finishes.
The installation takes approximately 30 minutes to complete. After the installation is complete the disk automatically ejects from the drive and a summary of the installation is shown on the screen.
For detailed information about Element Manager see Element Manager System
Installing the Element Manager joining an existing secure network
Step Action
1Log on to the server using the nortel account.
2Insert the MGMT DVD in the DVD tray.
3Enter the appinstall CLI command.
4At the prompt, enter the root account password. The system then prompts you to check the media.
5Enter Y to check the media, or N to proceed without checking the media, and press Enter.
6The Application Installation screen appears, as shown in Figure 85 "Application Installation window" (page 90)From the Application installation window select 3 to install the Element Manager joining an existing secure network. The appropriate packages are installed to the hard drive.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
29 October 2008
