Install the CS 1000 applications 71

Primary ECM Server (install EM, Subscriber Manager, and the primary ECM security service)

Backup ECM Server (install EM, Subscriber Manager, and a backup ECM security service)

ATTENTION

The first Linux server must be installed with the primary security service. Install the second Linux server with the backup security service, and then install any other required Linux servers. After the installation is complete for each installation option, you must log on to ECM and add the element (Network Routing Service or Element Manager) that was installed on each server. For more information about adding elements, see Enterprise Common Manager Fundamentals (NN43001-116)() .

Note: You can install the Primary and Backup Security Service with either NRS or EM. The load on the NRS server is usually heavier than the EM server. To optimize the servers load balance, Nortel recommends that if both EM on Linux and NRS Manager on Linux are installed, then install the Primary Security Service with EM and install the Backup Security Service with the Primary NRS server. In this case the Secondary NRS becomes a security client of the Primary and Backup Security servers.

If you are not installing EM on Linux, Nortel recommends that you install the Primary Security Service with the Primary NRS server and install the Backup Security Service with the Secondary NRS server.

At first logon to the Enterprise Common Manager (ECM) framework, change the password. For NRS password guidelines see Network Routing Service Installation and Commissioning (NN43001-564); for EM guidelines see Element Manager System Reference—Administration(NN43001-632)() .

If a password does not meet the policy requirements, the system rejects it.

For the following procedures, installation initiates configuration of the solid database.

Installing the NRS applications

Use this procedure to run the application CD-ROM after the reboot is complete for the Linux base installation.

Installing the Primary Security Service and Network Routing Service

Step Action

1Log on to the server using the nortel account.

2Insert the NRS CD-ROM in the CD-ROM tray.

Nortel Communication Server 1000

Linux Platform Base and Applications Installation and Commissioning

NN43001-315 02.09

29 October 2008

Copyright © 2007–2008 Nortel Networks

Page 71
Image 71
Nortel Networks NN43001-315 manual Installing the NRS applications