Nortel Networks NN43001-315 manual

A BIOS Serial Console Baud Rate configuration window appears. This window presents you with four settings for the serial port speed:

•9600

•19200

•57600

•115200

5Navigate to the 9600 setting and press Enter. This configures the serial port speed to 9600 b/ps.

The BIOS Serial Console & EMS configuration menu screen reappears.

6Press ESC to exit the BIOS Serial Console & EMS configuration menu screen.

The RBSU menu screen reappears.

7Press ESC to exit the ROM-based Setup Utility.

--End--

Setting the HP DL320 G4 server BIOS password

1Press Power to boot the server.

The server boots and the HP DL320 G4 boot screen appears.

Figure 119

Note: If the server is already up and running, power the server off and on to reboot and receive the HP DL320 G4 boot screen.

2Press F9 to invoke the ROM-based setup utility (RBSU) menu screen.

The RBSU menu screen appears.

Nortel Communication Server 1000

Linux Platform Base and Applications Installation and Commissioning

NN43001-315 02.09

29 October 2008