72Installation and configuration of applications on Linux base
3Enter the appinstall CLI command.
4At the prompt, enter the root account password. The system then prompts you to check the media.
5Enter Y to check the media, or N to proceed without checking the media, and press Enter.
6The Application installation screen appears, as shown in Figure 58 "Application Installation window" (page 72). From the Application installation window select 1 to install the Primary Security Service with NRS. The appropriate packages are installed to the hard drive.
Figure 58
Application Installation window
7The Solid server configuration confirmation screen appears. Confirm the server selection by selecting Yes, or return to the Solid server configuration window by selecting No. Press Enter to continue.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
29 October 2008
