3250 Watt Portable Generator

ASSEMBLY

Your generator requires some assembly and is ready for use after it has been properly serviced with the recommended oil and fuel.

If you have any problems with the assembly of your generator, please call the generator helpline at

1-800-743-4115. If calling for assistance, please have the model, revision, and serial number from the data tag available.

Remove Generator From Carton

1.Set carton on a rigid flat surface with “This Side Up” arrows pointing upward.

2.Carefully open top flaps of shipping carton.

3.Cut down corners at one end of carton from top to bottom and lay that side of carton down flat.

4.Remove all packing material, carton fillers, etc.

5.Remove generator from shipping carton.

Install Wheel Kit

The wheel kit is designed to greatly improve the portability of your generator.

NOTE: Wheel kit is not intended for over-the-road use.

To install wheel kit you need the following tools:

15/16" (22mm) box, open end, or socket wrench

Two 13mm box, open end, or socket wrenches

Install Wheel Kit as follows: (Refer to Figure 1)

1.Place bottom of generator cradle on a flat surface.

2.Place axle stud through wheel retainer on cradle frame.

3.Use 15/16” wrench to secure the axle stud to frame with 5/8-18 jam nut.

4.Install the other axle stud in the same manner.

NOTE: Be sure to install wheel with raised hub inboard.

5.Tip unit and install the wheel. Place flat washer over axle stud.

6.Retain wheel on axle stud with retaining pin. Install other wheel on remaining axle shaft the same way.

7.Attach the vibration mount to the mounting leg with a capscrew and lock nut.

8.Remove two front nuts from vibration mount on unit with 13mm wrench. Use these nuts to retain the mounting leg.

9.Center the lifting handle on generator end of cradle. Attach the handle using two 13mm wrenches with two capscrews and two hex nuts.

Figure 1 — Installing the Wheel Kit

Capscrew

 

 

Handle

 

Axle Stud

Grip

 

 

 

Nut

 

Wheel

 

 

Nut

Jam Nut

 

Mounting Leg

Use Existing Fasteners

Washer

 

Retaining Pin

Vibration Mount

to Secure Leg

 

Capscrew

 

 

6

 

Page 6
Image 6
Briggs & Stratton 1653 owner manual Assembly, Remove Generator From Carton, Install Wheel Kit

1653 specifications

The Briggs & Stratton 1653 is a powerful and reliable engine widely used in outdoor equipment, particularly for riding lawn mowers and garden tractors. This engine stands out in the field because of its robust design and innovative technology, ensuring optimal performance and durability.

One of the main features of the Briggs & Stratton 1653 engine is its displacement capacity of 656 cc, providing sufficient power for various lawn care tasks. This engine is engineered to deliver an impressive output, typically around 23 horsepower, making it suitable for heavy-duty applications. The engine utilizes a vertical crankshaft configuration, which contributes to its efficient fuel consumption and excellent torque delivery.

Equipped with advanced features, the 1653 engine includes an OHV (Overhead Valve) design. This configuration allows for better airflow and fuel efficiency, leading to smoother operation and reduced emissions. Moreover, the engine incorporates a full-pressure lubrication system, promoting enhanced longevity by ensuring all critical components receive adequate oil flow.

One of the defining technologies in the Briggs & Stratton 1653 is its use of the Easy Start system, which makes starting the engine a hassle-free experience. This is particularly beneficial for users who may not have extensive experience operating machinery. Additionally, the engine is designed with a cast-iron cylinder sleeve that increases durability and reduces wear, ensuring long-lasting performance.

The Briggs & Stratton 1653 also boasts a heavy-duty air filtration system that effectively keeps dirt and debris from entering the engine, thereby maintaining optimal performance levels. This feature is crucial for anyone who operates in dusty or rough environments, as it helps extend the engine's lifespan.

Another important characteristic of the 1653 is its vibration dampening system, which minimizes operator fatigue during prolonged use. The engine is also designed to be maintenance-friendly, with easily accessible components for routine checks and oil changes.

In summary, the Briggs & Stratton 1653 is a high-performance engine that combines power, efficiency, and durability. With its innovative technologies and user-friendly features, it is an excellent choice for homeowners and landscaping professionals looking for a reliable engine to tackle various outdoor tasks. Whether for residential or commercial use, the 1653 engine stands out as a top contender in the market for its unparalleled performance and longevity.