3250 Watt Portable Generator

USING THE GENERATOR

System Ground

The generator has a system ground that connects the generator frame components to the ground terminals on the AC output receptacles.The system ground is connected to the AC neutral wire (the neutral is bonded to the generator frame).

Special Requirements

There may be Federal or State Occupational Safety and Health Administration (OSHA) regulations, local codes, or ordinances that apply to the intended use of the generator. Please consult a qualified electrician, electrical inspector, or the local agency having jurisdiction.

•In some areas, generators are required to be registered with local utility companies.

•If the generator is used at a construction site, there may be additional regulations which must be observed.

Connecting to a Building’s Electrical System

Connections for standby power to a building’s electrical system must be made by a qualified electrician.The connection must isolate the generator power from utility power, and must comply with all applicable laws and electrical codes.

WARNING

Generator produces powerful voltage.

Failure to isolate generator from power utility can result in death or injury to electric utility workers due to backfeed of electrical energy.

•When using generator for backup power, notify utility company. Use approved transfer equipment to isolate generator from electric utility.

•Use a ground fault circuit interrupter (GFCI) in any damp or highly conductive area, such as metal decking or steel work.

•DO NOT touch bare wires or receptacles.

•DO NOT use generator with electrical cords which are worn, frayed, bare or otherwise damaged.

•DO NOT operate generator in the rain.

•DO NOT handle generator or electrical cords while standing in water, while barefoot, or while hands or feet are wet.

•DO NOT allow unqualified persons or children to operate or service generator.

Generator Location

Generator Clearance

WARNING

Running generator gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide will cause nausea, fainting or death.

•Operate generator ONLY outdoors.

•Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes or other openings.

•DO NOT operate generator inside any building or enclosure, including the generator compartment of a recreational vehicle (RV).

The generator must be at least 5 ft. (152 cm) from structures having combustible walls and/or other combustible materials. Leave at least 3 ft. (92 cm) all around generator including overhead, for adequate cooling, maintenance and servicing.

Place generator in a well ventilated area, which will allow for removal of deadly exhaust gas. DO NOT place generator where exhaust gas could accumulate and enter inside or be drawn into a potentially occupied building. Ensure exhaust gas is kept away from any windows, doors, ventilation intakes or other openings that can allow exhaust gas to collect in a confined area (Figure 3). Prevailing winds and air currents should be taken into consideration when positioning generator.

Figure 3 — Generator Clearance

Typical Generator Shown

Exhaust Port

8

Page 7 Page 9
Page 8
Image 8
Briggs & Stratton 1653 owner manual Using the Generator, System Ground, Connecting to a Building’s Electrical System
Page 7 Page 9

1653 specifications

The Briggs & Stratton 1653 is a powerful and reliable engine widely used in outdoor equipment, particularly for riding lawn mowers and garden tractors. This engine stands out in the field because of its robust design and innovative technology, ensuring optimal performance and durability.

One of the main features of the Briggs & Stratton 1653 engine is its displacement capacity of 656 cc, providing sufficient power for various lawn care tasks. This engine is engineered to deliver an impressive output, typically around 23 horsepower, making it suitable for heavy-duty applications. The engine utilizes a vertical crankshaft configuration, which contributes to its efficient fuel consumption and excellent torque delivery.

Equipped with advanced features, the 1653 engine includes an OHV (Overhead Valve) design. This configuration allows for better airflow and fuel efficiency, leading to smoother operation and reduced emissions. Moreover, the engine incorporates a full-pressure lubrication system, promoting enhanced longevity by ensuring all critical components receive adequate oil flow.

One of the defining technologies in the Briggs & Stratton 1653 is its use of the Easy Start system, which makes starting the engine a hassle-free experience. This is particularly beneficial for users who may not have extensive experience operating machinery. Additionally, the engine is designed with a cast-iron cylinder sleeve that increases durability and reduces wear, ensuring long-lasting performance.

The Briggs & Stratton 1653 also boasts a heavy-duty air filtration system that effectively keeps dirt and debris from entering the engine, thereby maintaining optimal performance levels. This feature is crucial for anyone who operates in dusty or rough environments, as it helps extend the engine's lifespan.

Another important characteristic of the 1653 is its vibration dampening system, which minimizes operator fatigue during prolonged use. The engine is also designed to be maintenance-friendly, with easily accessible components for routine checks and oil changes.

In summary, the Briggs & Stratton 1653 is a high-performance engine that combines power, efficiency, and durability. With its innovative technologies and user-friendly features, it is an excellent choice for homeowners and landscaping professionals looking for a reliable engine to tackle various outdoor tasks. Whether for residential or commercial use, the 1653 engine stands out as a top contender in the market for its unparalleled performance and longevity.
Top Page Image Contents