BGP and BGP4+ Commands

To disable the disallow-infinite-holdtimefeature on the BGP speaker with the IP address of 10.10.10.10, enter the command:

awplus# configure terminal

awplus(config)# router bgp 10

awplus(config-router)# no neighbor 10.10.10.1 disallow-infinite-holdtime

Examples [BGP4+] To enable the disallow-infinite-holdtimefeature on the BGP4+ speaker with the IPv6 address of 2001:0db8:010d::1, enter the commands:

awplus# configure terminal

awplus(config)# router bgp 10

awplus(config-router)#neighbor 2001:0db8:010d::1 disallow-infinite-holdtime

To disable the disallow-infinite-holdtimefeature on the BGP4+ speaker with the IPv6 address of 2001:0db8:010d::1, enter the commands:

awplus# configure terminal

awplus(config)# router bgp 10

awplus(config-router)#no neighbor 2001:0db8:010d::1 disallow-infinite-holdtime

Related Commands neighbor timers (BGP and BGP4+)

 

Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches

 

C613-50032-01 REV D

AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6

3.113

Page 211
Image 211
Allied Telesis VERSION 5.4.3-2.6 manual Related Commands neighbor timers BGP and BGP4+