Allied Telesis VERSION 5.4.3-2.6, BGP4 BGP Neighbor status logging, Show ip bgp regexp expression

BGP and BGP4+ Introduction

awplus#

show ip bgp regexp <expression>	This command displays the routes that have an autonomous
	system path that matches the specified regular expression
	entered on the command line.
awplus#	This command displays the contents of the IPv4 routes in the
show ip bgp [<ip-addr>
<ip-addr/m>]	BGP routing table.
awplus#	This command displays the contents of the IPv6 routes in the
show bgp ipv6 <ipv6-addr>
	BGP4+ routing table.
awplus#	This command displays detailed information on connections to
show ip bgp neighbors
[<ipv4-addr>	individual BGP neighbors. Note this command does not display
[advertised-routes	IPv4 routes learned from a specified BGP neighbor. It shows
received prefix-filter	BGP session information and the number of announced and
received-routesroutes]]	accepted prefixes. A counter shows how many routes have
	been announced and accepted, but not learned.
awplus#	This command displays detailed information on connections to
show bgp ipv6 neighbors [<ipv6-
addr> [advertised-routes	individual BGP4+ neighbors. Note this command does not
received prefix-filter	display IPv6 routes learned from a specified BGP4+ neighbor. It
received-routesroutes]]	shows BGP4+ session information and the number of
	announced and accepted prefixes. A counter shows how many
	routes have been announced and accepted, but not learned.
awplus#	This command displays all BGP paths for IPv4 routes in the
show ip bgp paths
	table.
awplus#	This command displays all BGP4+ paths for IPv6 routes in the
show bgp ipv6 paths
	table.
awplus#	This command displays the status of all BGP connections.
show ip bgp summary
awplus#	This command displays the status of all BGP4+ connections.
show bgp ipv6 summary

BGP Neighbor status logging

To enable the logging of messages generated when a BGP neighbor resets, use the following command in Router Configuration mode:

awplus(config-router)#

bgp log-neighbor-changesThis command generates log messages whenever a BGP neighbor resets.

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	1.31