Allied Telesis BGP4, VERSION 5.4.3-2.6 manual Show ip bgp cidr-only BGP, Global

BGP and BGP4+ Commands

show ip bgp cidr-only (BGP)

Use this command to display routes with non-natural network masks.

For information on output options, see “Controlling “show” Command Output” on page 3.6.

Syntax show ip bgp cidr-only

Syntax [VRF] show ip bgp [globalvrf <vrf-name>] cidr-only

Parameter	Description
global	When VRF-Lite is configured, apply the command to the global routing
	and forwarding table.
vrf	Apply the command to the specified VRF instance.
<vrf-name>	The name of the VRF instance.

Mode User Exec and Privileged Exec

Example

awplus# show ip bgp cidr-only

awplus# show ip bgp vrf red cidr-only

Output Figure 3-10: Example output from the show ip bgp cidr-only command

BGP table version is 0, local router ID is 10.10.10.50
Status codes: s suppressed, d damped, h history, p stale, *
valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network	Next Hop	Metric LocPrf Weight
Path
*> 3.3.3.0/24	10.10.10.10	0	11
i
*> 6.6.6.0/24	0.0.0.0	32768	i

Total number of prefixes 2

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.222	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	C613-50032-01 REV D