Allied Telesis VERSION 5.4.3-2.6 manual Bgp update-delay BGP and BGP4+, 3600

BGP and BGP4+ Commands

bgp update-delay (BGP and BGP4+)

Use this command to specify the update-delay value for a graceful-restart capable router. Use the no variant of this command to revert to the default update-delay value.

Syntax [BGP/BGP4+]	bgp update-delay <1-3600>
	no bgp update-delay [<1-3600>]
	Parameter	Description
	<1-3600>	Delay value in seconds.
Default [BGP/BGP4+]	The default update-delay value is 120 seconds.
Mode [BGP/BGP4+]	Router Configuration
Usage [BGP/BGP4+]	The update-delay value is the maximum time a graceful-restart capable router which is
	restarting will defer route-selection and advertisements to all its graceful-restart capable
	neighbors. This maximum time starts from the instance the first neighbor attains
	established state after restart. The restarting router prematurely terminates this timer
	when end-of-rib markers are received from all its graceful-restart capable neighbors.

Example
[BGP/BGP4+]	awplus#	configure terminal
	awplus(config)#	router bgp 10
	awplus(config-router)#	bgp update-delay 345

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	3.43