Allied Telesis VERSION 5.4.3-2.6 Neighbor attribute-unchanged BGP and BGP4+, As-path, Next-hop

BGP and BGP4+ Commands

neighbor attribute-unchanged (BGP and BGP4+)

Use this command to advertise unchanged BGP or BGP4+ attributes to the specified BGP or BGP4+ neighbor.

Use the no variant of this command to disable this function.

Syntax [BGP/BGP4+] neighbor <neighborid> attribute-unchanged {as-pathnext-hopmed}

no neighbor <neighborid> attribute-unchanged {as-pathnext-hopmed}

Parameter	Description
<neighborid> {<ip-address>ipv6-addr><peer-group>}
	<ip-address>	Specify the address of an IPv4 BGP neighbor, in
		dotted decimal notation A.B.C.D.
	<ipv6-addr>	Specify the address of an IPv6 BGP4+ neighbor,
		entered in hexadecimal in the format X:X::X:X.
	<peer-group>	Enter the name of an existing peer-group. For
		information on how to create peer groups, refer
		to the neighbor peer-group (add a neighbor)
		(BGP and BGP+) command on page 3.144, and
		neighbor route-map (BGP and BGP4+)
		command on page 3.159. When this parameter
		is used with this command, the command
		applies on all peers in the specified group.
as-path	AS path attribute.
next-hop	Next hop attribute.
med	Multi Exit Discriminator.

Mode [BGP] Router Configuration or IPv4 Address Family Configuration

Mode [BGP4+] IPv6 Address Family Configuration

Usage [BGP/BGP4+] Note that specifying this command with the optional as-pathparameter has the same effect as invoking the neighbor transparent-as (BGP and BGP4+) command.

Note this specifying this command with the optional next-hopparameter has the same effect as invoking the neighbor transparent-nexthop (BGP and BGP4+) command.

Examples [BGP]

awplus# configure terminal

awplus(config)# router bgp 10

awplus(config-router)#neighbor 10.10.0.75 attribute-unchanged as-path med

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	3.93