Allied Telesis BGP4 manual Address-family ipv6, Neighbor 20010db8010d1 activate, Activate

BGP and BGP4+ Commands

Examples [BGP4+] To enable an exchange of routes in IPv6 Address Family Configuration mode with a neighboring router with the IPv6 address 2001:0db8:010d::1, enter the commands

as shown below:
awplus#	configure terminal
awplus(config)#	router bgp 10
awplus(config-router)#	address-family ipv6
awplus(config-router-af)#	neighbor 2001:0db8:010d::1 activate

To disable an exchange of routes in IPv6 Address Family Configuration mode with a neighboring router with the IPv6 address 2001:0db8:010d::1, enter the commands

as shown below:
awplus#	configure terminal
awplus(config)#	router bgp 10
awplus(config-router)#	address-family ipv6
awplus(config-router-af)#	no neighbor 2001:0db8:010d::1
	activate

To enable an exchange of routes with a neighboring router with the peer-group named group1, enter the commands as shown below:

awplus# configure terminal awplus(config)# router bgp 10

awplus(config-router)#neighbor group1 peer-group

awplus(config-router)#neighbor 2001:0db8:010d::1 remote-as 10

awplus(config-router)# address-family ipv6

awplus(config-router-af)#neighbor 2001:0db8:010d::1 peer-group group1

awplus(config-router-af)# neighbor group1 activate

To disable an exchange of routes with a neighboring router with the peer-group named group1, enter the commands as shown below:

awplus# configure terminal

awplus(config)# router bgp 10

awplus(config-router)# address-family ipv6

awplus(config-router-af)#no neighbor group1 activate

Related Commands neighbor peer-group (add a neighbor) (BGP and BGP+) neighbor route-map (BGP and BGP4+)

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.84	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	C613-50032-01 REV D