Allied Telesis VERSION 5.4.3-2.6 manual Clear bgp ipv6 external BGP4+

BGP and BGP4+ Commands

clear bgp ipv6 external (BGP4+)

Use this command to reset the BGP4+ connections to all external peers.

Syntax clear bgp ipv6 external [in [prefix-filter]outsoft [inout]]

clear bgp ipv6 external
clear bgp ipv6 external				in [prefix-filter]
clear	bgp	ipv6	external	out
clear	bgp	ipv6	external	soft [inout]

Parameter	Description
external	Clears all external peers.
in	Indicates that incoming advertised routes will be cleared.
prefix-filter	Specifies that a prefix-list will be sent, by the ORF mechanism, to
	those neighbors with which the ORF capability has been
	negotiated. The neighbors will be triggered to resend updates,
	which match the prefix-list filter, to the local router. The local
	router will then perform a soft reconfiguration.
out	Indicates that outgoing advertised routes will be cleared.
soft in	Soft inbound reset causes the neighbors to resend all their
	updates to the local switch, without resetting the connection or
	clearing the entries in the local switch. So, the local switch stores
	new updates, and uses them to systematically replace existing
	table entries. This process can use a considerable amount of
	memory.
soft out	Soft outbound reset causes the switch to simply resend all its
	updates to the specified neighbor(s), without resetting the
	connection, or clearing table entries.

Mode Privileged Exec

Examples
awplus# clear bgp ipv6 external	in
awplus# clear bgp ipv6 external	in prefix
awplus# clear bgp ipv6 external	out
awplus# clear bgp ipv6 external	soft out
awplus# clear bgp ipv6 external	soft in

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
3.60	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	C613-50032-01 REV D