Allied Telesis VERSION 5.4.3-2.6 manual Bgp nexthop-trigger-count BGP and BGP4+, 127

BGP and BGP4+ Commands

bgp nexthop-trigger-count (BGP and BGP4+)

Use this command to configure the display of BGP nexthop-tracking status.

Use the no variant of this command to disable this function.

Syntax [BGP/BGP4+] bgp nexthop-trigger-count <0-127>

no bgp nexthop-trigger-count

Mode [BGP/BGP4+]

Example [BGP/BGP4+]

ParameterDescription

<0-127> BGP nexthop-tracking status.

Router Configuration

To enable nexthop-tracking status on the BGP peer belonging to the Autonomous System (AS) 100, enter the following commands:

awplus# configure terminal

awplus(config)# router bgp 100

awplus(config-router)#bgp nexthop-trigger-count 10

To disable nexthop-tracking status, enter the following commands:

awplus# configure terminal

awplus(config)# router bgp 100

awplus(config-router)#no bgp nexthop-trigger-count

Related Commands bgp nexthop-trigger delay (BGP and BGP4+) bgp nexthop-trigger enable (BGP and BGP4+) show bgp nexthop-tracking (BGP)

	Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches
C613-50032-01 REV D	AlliedWare PlusTM Operating System - Software Version 5.4.3-2.6	3.37