
BGP and BGP4+ Commands
show ip bgp (BGP)
Use this command to display BGP network information.
For information on output options, see “Controlling “show” Command Output” on page 3.6.
Syntax show ip bgp
Parameter Description
Mode User Exec and Privileged Exec
Example
awplus# show ip bgp 10.10.1.34/24
Output Figure 3-8: Example output from the show ip bgp command
BGP table version is 7, local router ID is 80.80.80.80 Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network | Next Hop | Metric LocPrf Weight |
| ||
Path |
|
|
|
|
|
S>i10.70.0.0/24 | 192.10.23.67 | 0 | 100 | 0 | ? |
S>i30.30.30.30/32 | 192.10.23.67 | 0 | 100 | 0 | ? |
S>i63.63.63.1/32 | 192.10.23.67 | 0 | 100 | 0 | ? |
S>i67.67.67.67/32 | 192.10.23.67 | 0 | 100 | 0 | ? |
S>i172.22.10.0/24 | 192.10.23.67 | 0 | 100 | 0 | ? |
S>i192.10.21.0 | 192.10.23.67 | 0 | 100 | 0 | ? |
S>i192.10.23.0 | 192.10.23.67 | 0 | 100 | 0 | ? |
Total number of prefixes 7
Related Commands neighbor remove-private-AS (BGP)
| Software Reference Supplement for SwitchBlade® x8112, x908, x900 and x610 Series Switches |
|
3.220 | AlliedWare PlusTM Operating System - Software Version |